Voron Configuration

From Just in Time

Revision as of 21:10, 30 April 2023 by Danny (talk | contribs) (Adding steps performed so far)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

CAN Bus upgrade

This thread has info, but more noise than signal.
Klipper supports using the BTT Octopus as a USB-to-CAN device
Some experiences and designs in a github repo here.
Mellow SB2040 documentation.

Steps performed:

sudo /bin/sh -c "cat > /etc/network/interfaces.d/can0" << EOF
allow-hotplug can0
iface can0 can static
    bitrate 500000
    up ifconfig \$IFACE txqueuelen 1024
EOF

sudo wget https://cdn.mellow.klipper.cn/shell/can-enable -O /usr/bin/can-enable > /dev/null 2>&1 && sudo chmod +x /usr/bin/can-enable || echo "The operation failed"

Retrieved from "https://rurandom.org/justintime/index.php?title=Voron_Configuration&oldid=3955"