Actions

Difference between revisions of "Voron Configuration"

From Just in Time

 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
=== CAN Bus upgrade ===
 
=== CAN Bus upgrade ===
 +
Mellow sb2040.
  
 
* [https://forum.vorondesign.com/threads/can-bus-upgrade-information-and-sources.323/ This thread] has info, but more noise than signal.
 
* [https://forum.vorondesign.com/threads/can-bus-upgrade-information-and-sources.323/ This thread] has info, but more noise than signal.
 
* Klipper [https://www.klipper3d.org/CANBUS.html#usb-to-can-bus-bridge-mode supports] using the BTT Octopus as a USB-to-CAN device
 
* Klipper [https://www.klipper3d.org/CANBUS.html#usb-to-can-bus-bridge-mode supports] using the BTT Octopus as a USB-to-CAN device
 
* Some experiences and designs in a github repo [https://github.com/cruiten/Voron-Related/tree/main/CANbus/Documentation here].
 
* Some experiences and designs in a github repo [https://github.com/cruiten/Voron-Related/tree/main/CANbus/Documentation here].
* Mellow [https://mellow.klipper.cn/#/board/fly_sb2040/ SB2040 documentation]
+
* Mellow [https://mellow.klipper.cn/#/board/fly_sb2040/ SB2040 documentation].
 +
* [https://www.reddit.com/r/VORONDesign/comments/11j6hym/help_setting_up_canbus_sb2040_utoc3_octopus_11/ reddit thread] with useful links.
 +
* More [https://github.com/Esoterical/voron_canbus explanatory git pages].
 +
 
 +
 
 +
Steps performed:
 +
<code>sudo /bin/sh -c "cat > /etc/network/interfaces.d/can0" << EOF
 +
allow-hotplug can0
 +
iface can0 can static
 +
    bitrate 500000
 +
    up ifconfig \$IFACE txqueuelen 1024
 +
EOF</code>
 +
 
 +
 
 +
<blockquote><code>sudo wget <nowiki>https://cdn.mellow.klipper.cn/shell/can-enable</nowiki> -O /usr/bin/can-enable > /dev/null 2>&1 && sudo chmod +x /usr/bin/can-enable || echo "The operation failed"</code></blockquote>
 +
<code>sudo sed -i '/^exit\ 0$/i \can-enable -d can0 -b 500000 -t 1024' /etc/rc.local</code>
 +
 
 +
=== Flash CAN bus ===
 +
python3 flash_can.py  -i can0 -f ~/klipper/out/klipper.bin -u 9ba2113afef3

Latest revision as of 20:11, 1 January 2024

CAN Bus upgrade

Mellow sb2040.


Steps performed:

sudo /bin/sh -c "cat > /etc/network/interfaces.d/can0" << EOF
allow-hotplug can0
iface can0 can static
    bitrate 500000
    up ifconfig \$IFACE txqueuelen 1024
EOF


sudo wget https://cdn.mellow.klipper.cn/shell/can-enable -O /usr/bin/can-enable > /dev/null 2>&1 && sudo chmod +x /usr/bin/can-enable || echo "The operation failed"

sudo sed -i '/^exit\ 0$/i \can-enable -d can0 -b 500000 -t 1024' /etc/rc.local

Flash CAN bus

python3 flash_can.py  -i can0 -f ~/klipper/out/klipper.bin -u 9ba2113afef3