AVR timer interrupts
From Just in Time
Summary "howto" setup timer interrupts on AVR
Registers
- TCNTx
- is the timer counter itself. It's both readable and writeable. The counter starts as soon as prescale value is written to the CSxn (e.g. CS10 and CS11) bits, which are located in TCCRxB.
- OCRxA
- (output compare register). As soon as the timer reaches a value that is in this register, the appropriate bit in TIFR is set. This bit is set if the timer runs in CTC-mode, which can be switched on by setting WGMx0-WGMx3 to 0100 (setting WGMx2 to 1).