Voron Configuration

CAN Bus upgrade

• This thread has info, but more noise than signal.
• Klipper supports using the BTT Octopus as a USB-to-CAN device
• Some experiences and designs in a github repo here.
• Mellow SB2040 documentation.

Steps performed:

sudo /bin/sh -c "cat > /etc/network/interfaces.d/can0" << EOF
allow-hotplug can0
iface can0 can static
    bitrate 500000
    up ifconfig \$IFACE txqueuelen 1024
EOF

sudo wget https://cdn.mellow.klipper.cn/shell/can-enable -O /usr/bin/can-enable > /dev/null 2>&1 && sudo chmod +x /usr/bin/can-enable || echo "The operation failed"