Difference between revisions of "Voron Configuration"
From Just in Time
m (Adding steps performed so far) |
m (Add link and steps performed so far) |
||
| Line 5: | Line 5: | ||
* Some experiences and designs in a github repo [https://github.com/cruiten/Voron-Related/tree/main/CANbus/Documentation here]. | * Some experiences and designs in a github repo [https://github.com/cruiten/Voron-Related/tree/main/CANbus/Documentation here]. | ||
* Mellow [https://mellow.klipper.cn/#/board/fly_sb2040/ SB2040 documentation]. | * Mellow [https://mellow.klipper.cn/#/board/fly_sb2040/ SB2040 documentation]. | ||
| + | * [https://www.reddit.com/r/VORONDesign/comments/11j6hym/help_setting_up_canbus_sb2040_utoc3_octopus_11/ reddit thread] with useful links. | ||
| Line 18: | Line 19: | ||
<blockquote><code>sudo wget <nowiki>https://cdn.mellow.klipper.cn/shell/can-enable</nowiki> -O /usr/bin/can-enable > /dev/null 2>&1 && sudo chmod +x /usr/bin/can-enable || echo "The operation failed"</code></blockquote> | <blockquote><code>sudo wget <nowiki>https://cdn.mellow.klipper.cn/shell/can-enable</nowiki> -O /usr/bin/can-enable > /dev/null 2>&1 && sudo chmod +x /usr/bin/can-enable || echo "The operation failed"</code></blockquote> | ||
| + | <code>sudo sed -i '/^exit\ 0$/i \can-enable -d can0 -b 500000 -t 1024' /etc/rc.local</code> | ||
Revision as of 22:35, 30 April 2023
CAN Bus upgrade
- This thread has info, but more noise than signal.
- Klipper supports using the BTT Octopus as a USB-to-CAN device
- Some experiences and designs in a github repo here.
- Mellow SB2040 documentation.
- reddit thread with useful links.
Steps performed:
sudo /bin/sh -c "cat > /etc/network/interfaces.d/can0" << EOF
allow-hotplug can0
iface can0 can static
bitrate 500000
up ifconfig \$IFACE txqueuelen 1024
EOF
sudo wget https://cdn.mellow.klipper.cn/shell/can-enable -O /usr/bin/can-enable > /dev/null 2>&1 && sudo chmod +x /usr/bin/can-enable || echo "The operation failed"
sudo sed -i '/^exit\ 0$/i \can-enable -d can0 -b 500000 -t 1024' /etc/rc.local