Difference between revisions of "Notes on sonoff, shelly, tasmota"

Latest revision as of 21:13, 2 August 2021


Device	Tasmota page	Flashing	Notes
Sonoff Mini R2		Sonoff Mini R2 Switch flashing Tasmota Bash script for fashing Sonoff, including Mini Need physical access (press button) to go flash
Sonoff Dual R3		link1 no OTA templates and flashing instructions Configure as shutter Need wired connection for firmware flash
Shelly1 v3		OTA flashing can be flashed without physical access



Dual R3 #1, #2, #3 (w/ lead)	Tasmota flashed through wired interface. Shutter1-3
Shelly1 #1	Built into kitchen light switch. Original Shelly fw.
Shelly1 #2	issues with terminal screw twisted.

@@ Line 8: / Line 8: @@
 |Sonoff Mini R2
 |
-|[https://iot.formatx.net/sonoff-mini-r2-switch-flashing-tasmota/ Sonoff Mini R2 Switch flashing Tasmota]
+|
+* [https://iot.formatx.net/sonoff-mini-r2-switch-flashing-tasmota/ Sonoff Mini R2 Switch flashing Tasmota]
+* [https://github.com/njh/sonoff-ota-flash-cli Bash script] for fashing Sonoff, including Mini
+* Need physical access (press button) to go flash
 |
 |-
@@ Line 15: / Line 18: @@
 |
 * [https://notenoughtech.com/home-automation/how-to-flash-tasmota-on-sonoff-dualr3/ link1] no OTA
+* [https://templates.blakadder.com/sonoff_DUALR3.html templates and flashing instructions]
+* Configure [https://tasmota.github.io/docs/Blinds-and-Shutters/ as shutter]
+* Need wired connection for firmware flash
 |
 |-
@@ Line 20: / Line 26: @@
 |
 |
+* [https://github.com/yaourdt/mgos-to-tasmota OTA] flashing
+* can be flashed without physical access
 |
 |}
-Device status:
+=== Considerations ===
+* [https://esphome.io/# ESPHome] with e.g. e-paper hat or servo.
+=== Status ===
 {| class="wikitable"
 |+
@@ Line 28: / Line 41: @@
 !
 |-
-|Dual R3 #1 (w/ lead)
+|Dual R3 #1, #2, #3 (w/ lead)
-|Reset 5s, then Reset 5s again shows access point "ITEAD-<hex>"
+|Tasmota flashed through wired interface. Shutter1-3
-connect to 192.168.1.1 gives json struct with member "data"
-Try with laptop next.
 |-
 |Shelly1 #1