Difference between revisions of "Notes on sonoff, shelly, tasmota"
From Just in Time
m |
m |
||
| Line 16: | Line 16: | ||
* [https://notenoughtech.com/home-automation/how-to-flash-tasmota-on-sonoff-dualr3/ link1] no OTA | * [https://notenoughtech.com/home-automation/how-to-flash-tasmota-on-sonoff-dualr3/ link1] no OTA | ||
* [https://templates.blakadder.com/sonoff_DUALR3.html templates and flashing instructions] | * [https://templates.blakadder.com/sonoff_DUALR3.html templates and flashing instructions] | ||
| + | * Configure [https://tasmota.github.io/docs/Blinds-and-Shutters/ as shutter] | ||
| | | | ||
|- | |- | ||
Revision as of 16:45, 2 August 2021
| Device | Tasmota page | Flashing | Notes |
|---|---|---|---|
| Sonoff Mini R2 | Sonoff Mini R2 Switch flashing Tasmota | ||
| Sonoff Dual R3 |
|
||
| Shelly1 v3 |
Device status:
| Dual R3 #1 (w/ lead) | Reset 5s, then Reset 5s again shows access point "ITEAD-<hex>"
connect to 192.168.1.1 gives json struct with member "data" Try with laptop next. |
| Shelly1 #1 | Built into kitchen light switch. Original Shelly fw. |
| Shelly1 #2 | issues with terminal screw twisted. |